Rusan quick release adapter MAR-XX

This front adapter is part of the Rusan Modular front system. This system lets you use a front adapter and an adapter ring (connector) to easily attach your night vision or thermal imaging scope to the front of your rifle scope. The front adapter is attached to the objective of your rifle scope, and the adapter ring to your night vision or thermal imaging device, by then attaching the two together through the locking system your night vision or thermal imaging device is quickly attached to the front of your rifle scope.

The diameter of the attachment adapter should correspond to the outer diameter of the objective of the rifle scope to which the system is to be attached. Removal and reattachment is quickly done using the QD swivel handle, and causes no deviation to the zero point of your already calibrated scope.

Available in sizes: 30mm to 65mm. (For different sizes, please contact us).

For example, if the rifle scope says 3x10x50. Then 50 is the size of the glass.
Please note;if you own a Swarovski or Zeiss rifle scope, then the outer size of your rifle scope is 56. You will then need a 56mm adapter. If you own a different brand of scope, the size may vary and we recommend using a caliper to measure the outside of your scope.

Standard size scopes are: 42, 50 and 56mm. Again with a Swarovski or Zeiss rifle scope, the adapter sizes then are: 48, 56 and 62mm. (For another brand of scope, measure the outside with a caliper).

This adpater can be used with the following fittings (Connectors):

• MCR-M52: M52x0.75
• MCR-M49: M49x0.75 (Dipol…)
• MCR-M46: M46x0.75 (Nitehog, Electro-optic, Lahoux…)
• MCR-TM35: M44x0.75 (Swarovski tM 35)
• MCR-M33: M33.5×0.75 (Guide, Nitehog Viper…)
• MCR-M35: M35x1 (Pulsar Krypton, Proton…)
• MCR-M35P: M35x1 (Pulsar Krypton, Krypton 2, Proton)
• MCR-CORE-2: Pulsar Core (2 pins)
• MCR-PF: Pulsar F455 (4 pins)
• MCR-HIK-2: Hikmicro Thunder & Cheetah (and similar)
• Click on the blue link to go to all these Connectors.