Fx DRS Tactical 500 .22 ( 5.5mm )

The Fx DRS Tactical 500 .22 ( 5.5mm )!

The FX DRS Tactical 500 is the tactical scion of the FX DRS family. It stands out with a solid handguard that has a full-length Weaver/Picatinny scoperail on the top. At the bottom is an Arca-Swiss accessory rail, also full-length. There are also perfectly positioned holes for use with QD belt mounts.

In addition, the fully adjustable 2-stage trigger has an improved trigger blade and the FX DRS Tactical 500 has been given its own Tactical Power plenum with a capacity of 35 cc, on top of the 9 cc in the block itself. Optimized air flow here ensures maximum performance and minimum air consumption.

Another notable feature is that the FX DRS Tactical 500 features a connection for a Mil-Spec buffer tube, to which an AR15-style stock can be attached. Both are not included, as there is often one’s own specific preference for this. We have numerous flasks and buffer tubes in stock for this purpose, but the FX DRS Tactical 500 is also fine to use without it. The FX UG-1 grip, which does come standard, makes it possible to use it as a compressed air gun.

Features of the FX DRS Tactical 500

Internally, the DRS is packed with the latest technology in compressed air rifles. And of course, it already has multiple fine-tuning options as standard; from an externally adjustable regulator to an adjustable spring preload of the hammer spring. We’ll just pick out the highlights for you:

DRS air reservoir in barrel sleeve

The FX DRS is the first air rifle from FX that sees the compressed air reservoir integrated into the barrel jacket. No more cylinder or bottle under the barrel and this has the advantage of significantly lowering the overall profile of the compressed air rifle. This gives less obstruction in the shooting position, but also ensures that transportation and storage of the FX DRS Tactical 500 require less space. The reservoir capacity is 210 cc.

Adjustable regulator

In order for the FX DRS to fire every shot with equal pressure, this compressed air rifle uses an AMP MkII regulator. This regulator is externally adjustable, making it child’s play to perfectly match the pressure to the pellet or slug being used. This gives the highest possible purity and guarantees ultimate shot consistency.

Adjustable hammer spring

If there is no butt attached to the system, the spring preload of the hammer spring can be adjusted. If you give the hammer more spring preload, the valve will stay open longer, allowing a greater amount of air to pass through. Conversely, a lower hammer spring preload will give a shorter passage time. You can experiment with this, so that you keep a driving pressure behind the projectile in the barrel for as long as possible, without creating a disruptive overpressure as it leaves the barrel that can cause imbalance.

Tactical Power plenum

FX is known for paying great attention to the plenum. This is the air supply chamber between the regulator and the valve. It holds the portion of regulated compressed air that is used in its entirety for one projectile. Larger projectiles, longer runs and higher velocities require more air to allow the pellet or slug to leave the barrel at the desired velocity. Conversely, too much air supply is a waste of air and too much air still blowing out of the barrel can affect cleanliness. The FX DRS Tactical 500 has a 35 cc Tactical Power plenum. Perfect for pellets, but also great for slugs.

Superior STX running system

The barrel system has a removable Superior STX liner inside the barrel that features pulls and pitches pressed in through the outside. This gives the inside of the liner a very smooth surface and nicely flowing pulls and fields. All this ensures minimal drag and a good seal around the pellet or slug. The barrel has a ½ UNF thread with thread protector for mounting an optional silencer.

Adjustable trigger

To get the very best out of the FX DRS Tactical 500, it came with a fully adjustable trigger. This allows you to set the trigger exactly the way you want it, so that the feel matches your exact shooting style. Both the first and second stages are adjustable and the trigger blade is adjustable in distance and height, but can also be rotated for perfect ergonomics.

Loading and filling the FX DRS Tactical 500

With the magazine in place, it is simply a matter of pulling back the very smooth tension lever on the right side to load the FX DRS through. And to replenish the air supply, there is a filler hole on the right side into which you very easily insert a filler nipple.

Note: The FX DRS is delivered in an average state of tuning, making it universally usable. The maximum values given in the specifications are achievable by using the various adjustment options on the air rifle.

Specifications