Huben GK1 5,5mm (.22) en 6,35mm (.25)

This Huben GK1 V3 is a particularly powerful and clean shooting air pistol. Huben’s PCP air pistol shoots semi-automatically and is available for two different calibers. The magazine is fixed in the system and is therefore not interchangeable. The calibers available are 5.5mm and 6.35mm, with a magazine capacity of 19 pellets and 17 pellets, respectively. The magazine can be rotated by raising the lever, which is located just behind the magazine. Huben indicates that it is important to gently move the lever downwards after filling the magazine. By handling this with care, you prevent damage to the system.The barrel has a length of 210 mm and underneath is a PCP cylinder with a capacity of 85 cc and a filling pressure of 350 bar. You can easily read the remaining pressure on the pressure gauge on the left side of the Huben GK1 V3. The cylinder, like the magazine, cannot be removed. Instead, you get a filling adapter with the air gun, which you can plug into the barrel on the left side to refill it. It is possible to adjust the power of the Huben GK1 V3. You do this by inserting an Allen wrench into the opening – just behind the hexagonal trigger guard – in the handle. By turning to the left or to the right, you can increase or decrease the force. The Huben GK1 V3 is a very accurate shooting air pistol and with a red dot it will come into its own. There is an 11 mm Dovetail scope rail on top of the barrel shroud, on which you can mount an adapter plate. You can also make use of the excellent sight and sight that are standard on the GK1 V3. The rear sight can be adjusted sideways and the grain can be adjusted in height, so that you can adjust the air pistol to your own preferences even with just the open sights. Speaking of customizability; there’s an end cap on the front of the barrel shroud, which you can take off to get to the 1/2×20 UNF thread at the front end of the barrel. It comes standard with a silencer that you can then turn on.