Hikmicro Thunder TQ35C 2.0 clip on. Great for field and forest use.
The HikMicro Thunder 2.0 Clip-On TQ35C thermal scope (no reticle) is an attachment for a rifle scope. It attaches easily to the rifle scope and it has a weight without battery of only 538 grams.
The Thunder thermal imaging scope is compatible with various adapters and it features M52 x 0.75 threads. The clip-on has a 640×512 thermal sensor and the pixel pitch is only 12 µm for a razor-sharp image. With an impressively low NETD of less than 20 mK, the thermal imager transmits highly detailed thermal images. Those images are shown on the 1024×768 (0.39-inch) OLED display, with a frame rate of 50 Hz.
There is a dial on top of the thermal imaging scope that allows you to adjust the focus. The thermal sensor has a range of 1800 meters, making it possible to detect differences in heat even at long distances.
This thermal imaging viewer allows you to take photos and videos. You can do that manually using the buttons on top of the HikMicro Thunder 2.0 Clip-On TQ35C thermal imaging scope or you can leave that to the recoil-activated recording. This feature causes a short video with audio to be recorded the moment the thermal imager registers recoil. As a result, a short video is made every time the trigger is pulled.
The thermal imager has a 16 GB eMMC (embedded multimedia card) and the photos and videos you take will also be transmitted to your phone, provided you have the HikMicro Sight app.
That HikMicro Sight app is free to download and will get you connected to your HikMicro device. After the configuration, it is possible to adjust the settings of the thermal imaging viewer through the app and, of course, you can view the photos and videos in it.
The HikMicro Thunder 2.0 Clip-On TQ35C thermal imaging scope is equipped with a Li-ion battery. On a full charge, the thermal imager can stay on for as much as 6.5 consecutive hours. When the battery runs out, you can easily recharge it or swap it with the other battery. To do even longer with a battery charge, use standby mode. The thermal imaging viewer is easily put into standby mode or just reactivated, using the buttons on top. There are a total of five buttons, with the following functionality:
- Product code: HM-TR56-35S1G/CW-TQ35C 2.0
- Type: Front-mounted
- Sensor Resolution: 640×512 Pixels
- Pixel pitch: 12
- Thermal sensitivity: ≤20
- Optical magnification: 1x
- Lens diameter in mm: 35
- Wire cross not present
- Focus: Adjustable objective
- Display type:OLED
- Frame rate Hz: 50
- Streaming function: yes
- Li-on battery
- Battery life 6.5 hours
- Ip67
- Dimensions: 186.53×68.04×67.4 (lxwxh)
- Weight in grams: 538
Comes with 2 batteries, case, charger, lens cloth and usb cable.
| Weight | 3 kg |
|---|---|
| Merk |
Hikmicro |
Shipping options
Unless otherwise indicated, all in-stock items can be picked up in our store, or can be shipped via parcel post. Heavy items such as safes, or licensed items such as firearms and ammunition, can only be picked up at the store.
Shipping costs
All items except firearms, ammunition and safes will be delivered to your home.
